How To Fix ‘File Too Large For Destination File System’ Error In Windows #2022

Even if the destination has enough space, Windows will sometimes refuse to move a file because it is too large. Here’s how to get things fixed. This article will explain how to fix ’File Too Large for Destination file system’ error in Windows.

You can get the “File is too big for destination file system” problem while transferring files between your hard drives. There may appear to be an error due to inadequate storage at first, but the error message shows that it is a problem with the file system on your destination disc.

Thankfully, this is a simple problem to correct. A few diagnostic tips are mentioned below to assist you in resolving this problem on your Windows machine.

What Triggers the Problem “File Is Too Large for the Destination File System”?

When you try to move huge files larger than 4GB, you’ll frequently get this problem. Even if there is enough space on the destination disc to store the file, it must be formatted in the suitable NTFS format to handle huge files.

Reformatting your destination disc with a suitable file system is an apparent solution to this problem. You don’t need to utilize third-party programs because the Windows operating system has a built-in format choice. To understand more about the different file systems, see our full tutorial describing NTFS, FAT, and exFAT Windows file systems.

How to Make Use of the Built-in Windows Utility to Reformat FAT32 to NTFS

The simplest solution to resolve the “file is too large for destination file system” problem is to convert your FAT32 disc to the NTFS file system. This procedure, however, will delete all of the data on the disc. As a result, before starting with the procedures below, make a backup.

  • Plug your USB flash drive into your computer’s USB port.
  • Right-click on your target disk drive in File Explorer and pick Format.
  • Choose NTFS from the File System drop-down menu in the Format box.
  • Underneath the Format choices area, look for the Quick Format button.

Sit tight for the confirmation notification after clicking Start. Quit the format window and try moving the file once more. You should now be able to relocate your file without encountering any file system errors.

Employing GSplit to Partition Large Files

You can utilize GSplit to break huge files into smaller parts and then transfer them to the target disc if you don’t desire to format the storage for whatever reason. This is how you do it.

  • To finish the installation, download GSplit and launch the gsplit.exe file.
  • After launching the app, select Original File.
  • Select the file to divide by clicking the Browse button.
  • Next, select the Destination Folder from the left pane. Choose where you want to save the file here. You may also save the file to the target disc.
  • After that, on the left pane, select Split File.

You may now transfer the broken files to your desired location. Unfortunately, because the files are in.gsd format, you’ll need to combine them before using them

  • Return to the Split button and wait for the procedure to finish..
  • Install GSplit on the target computer and follow these procedures to reunite separated files.
  • Open the Unite tab in the app after it has been launched.
  • Pick the first component of the file using the Browse button.
  • After that, go to Select Output and choose a location to preserve all the files.
  • Lastly, to reunite files hit the Restore File option. GSplit will instantly detect and efficiently rejoin the remaining fragments of files in the same folder.

What exactly is a file system?

The file system is the method and architecture by which an operating system recognizes and organizes files on a disc. It can also apply to the disc or section on which file is saved, as well as the file system type. The most prevalent file systems in Windows are exFAT, FAT, FAT32, and NTFS. What are the distinctions between them?

FAT, FAT32, exFAT, and NTFS are the four types of file systems available

FAT, sometimes known as FAT16, is a straightforward and dependable file system. It performs well, although not as well as the following file systems in terms of efficiency, accessibility, and dependability. The largest file size supported by FAT is 2GB for a single file.

FAT32 is a file system designed for hard drives with limited storage space. The largest file size supported by FAT32 is 4GB for a single file. The benefit of FAT32 is that it has the most compatibility and may be used on a variety of platforms.

Microsoft introduced exFAT, often known as FAT64, with Windows Embedded 5.0 and above (including Windows CE 5.0/6.0, Windows Mobile 5/6/6.1). exFAT was created to fill the void left by FAT32 and is better suited to flash memory. Unfortunately, it has poor compliance and is only recognized by a few operating systems.

 

NTFS is now the most extensively used file system on PCs. The largest file size that NTFS allows for a single file is up to 16TB. On big volume external hard drives, NTFS is suggested for use.

FAT32 and NTFS are now the most widely used file systems in Windows.

Why is the file too big for the target file system?

If you encounter the message “File is too big for the target file system,”. This means you’re most likely trying to copy a file greater than 4GB to a FAT32 disc. All files stored in FAT32 must be no more than 4GB in size.

Should I use NTFS or FAT32 to format my USB drive?

Both FAT32 and NTFS are supported when connecting a USB drive to a Windows machine. The main distinction is that only NTFS accepts files bigger than 4GB. FAT32, on the other hand, is interoperable with both Windows and Mac, as well as both Windows and printing machines.

What is the best way to transfer huge files to a pen drive?

Kindly ensure the pen drive is either exFAT or NTFS mounted. If not, format the partitions first. Then moving huge files to a pen drive should be a breeze.

 

 

Similar Posts

Leave a Reply

Your email address will not be published.